Song BotaiMobile aluminum alloy lifting platformRecord breaking production

How to maintain the aluminum alloy elevator when it is not in use? Xiaobian reminded the user that if the aluminum alloy elevator we purchased is not ready for use for a long time， we must do a good job in protecting the equipment from use.

2Aluminum alloy elevator: the fully automatic aerial work platform has a strong structure， which makes the deflection and swing of the aerial work platform very small. With automatic walking function it can walk in different working conditions without external power supply. The walking speed of the handle can be adjusted. It can move flexibly， operate easily， and lift freely. Only one person can complete forward， backward，Aluminum alloy lifting platform turn，SiroliMobile aluminum alloy hydraulic lifting platformLarge quantity in stock fast， and up and down movements， saving labor and labor. It can be designed and produced according to user requirements.

lSong BotaiSelf-developed integrated built-in slider is used between masts to make the dynamic clearance between masts small.

When the aluminum alloy elevator is running， the head and hands of the personnel shall not be exposed outside the safety fence.

QZhanIf the idle speed of the aluminum alloy elevator does not improve after the above maintenance， the fault may be caused by the engine， usually due to the excessive clearance between the engine inlet valve rod and the guide pipe， or the engine needs to be overhauled and the technical performance is reduced， so the cylinder head should be removed for maintenance.

SiA manual lowering valve is provided for emergency lowering in case of power failure.

It is strictly forbidden to wear slippers， safety helmets and work permits and carry children into the construction site when using mobile elevators.

Generally，Aluminum alloy lifting platform such as price， performance， safety， stability， and so on. The equipment we commonly use for large-tonnage lifting includes guideway lifting platform and a crane driven by electric hoist. We can analyze the difference between the two from the use of the equipment and various aspects.

eSingle column aluminum alloy elevator.

HC. Check the hydraulic oil quality and level. When the lifting platform is raised to a high level the hydraulic oil level should be -mm higher than the bottom of the oil tank. When the oil color of the hydraulic oil becomes dark， the oil is sticky or there is sand and other foreign matters in the oil， it should be maintained at the end of the year A. Check the hydraulic and pipeline connection parts. Replace the damaged pipe immediately; Tighten the pipe joint when the connection part is loose.

OreformFor low-rise buildings， we used to use ladders for operation， but the height of the ladder is limited， and the back and forth transportation is also very inconvenient，Aluminum alloy lifting platform so some modern high-rise buildings use aluminum alloy elevators for height operation.

iYAluminum alloy elevator: the fully automatic aerial work platform has a strong structure which makes the deflection and swing of the aerial work platform very small. With automatic walking function， it can walk in different working conditions without external power supply. The walking speed of the handle can be adjusted. It can move flexibly，SiroliMobile aluminum alloy hydraulic lifting platformLarge quantity in stock operate easily， and lift freely. Only one person can complete forward， backward， fast， slow walking， saving labor and labor. It can be designed and produced according to user requirements.

During the test load， it is also necessary to carry out several times of test load. The no-load test can be selected to check whether the lifting and lowering speed of the aluminum alloy elevator is reasonable， whether the stability of the platform can meet the requirements，Aluminum alloy elevator_ Aluminum alloy lifting platform_ Aluminum alloy lifting platform - aluminum alloy elevator manufacturer whether the sound is normal， and whether the rated lifting height can be reached. If the test data is normal， the second test load can be carried out; The second trial load test can choose half-load test， focusing on the stability of the platform. If the sloshing is within the allowable range， the third test - full load test can be conducted to determine whether the parameters of the platform are normal under the rated load. If it is normal， the fourth test - overload test can be carried out， and % load can be added for the test to check whether the anti-overload device of the platform is reasonable. If the setting is correct， the lifting platform cannot rise under the overload condition. If it can rise， it means that the overload device of the lifting platform is not reasonable， and the manufacturer should be required to readjust the setting.

The lifting platform overload hydraulic safety protection system is equipped.

demandeBecause many customers reported that the aluminum alloy elevator was put in the warehouse after it was bought and used. When it was used again during the break time， various abnormal conditions occurred. So if it was not ready for use for a long time， we must do a good job of maintenance for a long time.

DEnvironmental protection， energy saving， hand shaking turntable lifting height， lifting table without electricity， no motor， green， environmental protection products.

Drain all the hydraulic oil in the oil tank， open the oil tank， take out the oil suction filter， wash it and put it back into the oil tank， and install it in situ. The tank is refilled with new oil.

jSong BotaiIt is forbidden to run the engine for a long time in a closed garage. The exhaust gas from the engine of aluminum alloy elevator contains carbon monoxide. This is a kind of toxic gas， which is in low concentration of carbon monoxide for a long time. It can cause headache， shortness of breath， nausea and vomiting， body deficiency， dizziness， psychological disorder and even brain damage. In serious cases， it can cause death， such as starting the engine of the equipment in the garage.

hVAs a light and convenient elevator， and is a good helper for the maintenance of equipment， electrical equipment and cleaning in the hotel exhibition hall. todayBefore use， no-load lifting must be carried out to check whether the hydraulic system is normal; The load of the workbench shall not be greater than the rated value and shall not be subject to intense artificial shaking; The hydraulic oil in the oil tank is changed every hours.

The safety awareness can not be cultivated in a short time. The aluminum alloy elevator manufacturer needs to implement it over and over again. In addition， it also needs to ensure the quality of daily safety education. The education and activity frequency of workshop employees can not only be one-sided， but also improve the safety quality of employees by training once. The education that fails to achieve the training purpose should be reflected to avoid the formalization of training education， Waste of energy is not effective.