+8613064022215
sellelevator@163.com
The quality and level of hydraulic oil. The lifting platform is raised all the way. When it is in this position， the hydraulic oil level should be - mm higher than the tank bottom. The hydraulic oil is darkened， sticky， or has sand and other foreign matters if any， it should be found in timeThe annual maintenance of aluminum alloy elevator can follow the following points according to certain standards. The annual maintenance is a major maintenance， so special attention should be paid to the following points: check all hydraulic pipes and joints of aluminum alloy elevator. The pipes shall not be damaged and the joints shall not be loose. All joints must be tightened.
5The mechanical vibration oil pipe is thin and long，Products with many elbows and not fixed. When the oil flow rate is high，NangongAluminum alloy elevator double mastUpgrading, renovating, and fueling our main business it is easy to cause pipe vibration; The rotating parts of the motor and hydraulic pump are unbalanced， the alignment is not good during installation， or the coupling is loose， which can cause vibration and noise.
lWafangdianSelf-developed integrated built-in slider is used between masts to make the dynamic clearance between masts small.
After the health condition of each component is checked， it is necessary to check the overall condition around the platform car， check the screws or connections， and then check whether the screws or connections are loose; We need to remind you that we also need to see if there is any oil leakage or oil seepage， and solve it in time to avoid causing unnecessary trouble.
LParis oli AirportOverload or long-term eccentric load operation is strictly prohibited， which will not only reduce the service life，Products but also have potential safety hazards.
Ij Year-end maintenance and inspection of hydraulic and pipe connections. Replace the damaged pipe immediately; Tighten the pipe joint when the connection part is loose.
When using the mobile lifting platform， it is strictly forbidden for any person to operate， stand or walk under the lifting frame， basket， lifting frame wellhead and lifting objects.
The safety awareness can not be cultivated in a short time. The aluminum alloy elevator manufacturer needs to implement it over and over again. In addition， it also needs to ensure the quality of daily safety education. The education and activity frequency of workshop employees can not only be one-sided， but also improve the safety quality of employees by training once. The education that fails to achieve the training purpose should be reflected to avoid the formalization of training education， Waste of energy is not effective.
oIn modern society， there are many high-altitude work projects. Its danger is not only related to the construction management， personnel quality，Products but also to the working environment and equipment used in construction. Therefore， the high-altitude work equipment has received more and more attention. The aluminum alloy lifting has been continuously developed and innovated，NangongAluminum alloy elevator double mastUpgrading, renovating, and fueling our main business and has been trusted and used by customers.
ODuring the test load， it is also necessary to carry out several times of test load. The no-load test can be selected to check whether the lifting and lowering speed of the aluminum alloy elevator is reasonable， whether the stability of the platform can meet the requirements， whether the sound is normal， and whether the rated lifting height can be reached. If the test data is normal， the second test load can be carried out; The second trial load test can choose half-load test focusing on the stability of the platform. If the sloshing is within the allowable range， the third test - full load test can be conducted to determine whether the parameters of the platform are normal under the rated load. If it is normal， the fourth test - overload test can be carried out，Aluminum alloy elevator_ Aluminum alloy lifting platform_ Aluminum alloy lifting platform - aluminum alloy elevator manufacturer and % load can be added for the test to check whether the anti-overload device of the platform is reasonable. If the setting is correct， the lifting platform cannot rise under the overload condition. If it can rise， it means that the overload device of the lifting platform is not reasonable， and the manufacturer should be required to readjust the setting.
QAnalysis projectAs a light and convenient elevator aluminum alloy elevator has been widely used， and is a good helper for the maintenance of equipment， no-load lifting must be carried out to check whether the hydraulic system is normal; The load of the workbench shall not be greater than the rated value and shall not be subject to intense artificial shaking; The hydraulic oil in the oil tank is changed every hours.
pIThe aluminum alloy elevator comprehensively introduces the characteristics and classification of the aluminum alloy elevator and its different uses. The aluminum alloy elevator is refined from high-strength aluminum profiles. Due to the high strength of the profile， it has the advantages of beautiful appearance， small size， light weight， compact structure， convenient movement， stable lifting platform， convenient operation， safety and reliability， which makes the work at height more convenient and fast， can walk fast and slowly， can adjust speed， and the column lifting system， It has the characteristics of large load capacity， strong stability， large platform area and convenient implementation. It is the ideal aerial work equipment for safe production of modern enterprises. It can be divided into single-column aluminum alloy， double-column aluminum alloy three-column aluminum alloy and four-column aluminum alloy.
The errors in hydraulic maintenance can be divided into two categories， one is the technical measures that lead to errors due to the wrong understanding of professional technology， such as assembly errors.
Aluminum alloy elevator plays an important role in both industrial production and our daily life. It brings us a lot of benefits. There are many functional features of aluminum alloy elevators. In our life， we use elevators in many business buildings. The performance of aluminum alloy elevators is similar to that of elevators. When we use aluminum alloy elevators， we can also set aluminum alloy elevators according to our own needs. It can be seen that the aluminum alloy elevator plays a very important role for us.
managementeGood driving performance reduces noise， and also makes the transmission more stable and the mechanism vibration less.
AWhat should we do if the hydraulic system of aluminum alloy infiltrates water impurities， and how harmful water impurities are to the hydraulic system of aluminum alloy? We know well， but how can we prevent water from seeping into the hydraulic system of the elevator? After reading this article， you may know that the oil contains excessive water impurities， which will lead to corrosion of the hydraulic components of aluminum alloy elevator， emulsification and deterioration of the oil， reduction of the strength of the lubricating oil film， attention should also be paid to tightening the cover when the oil storage tank is not in use， so that it can be placed upside down; The oil with high water content should be filtered for many times. The hydraulic oil of the elevator should be replaced with a dry filter paper every time it is filtered. When there is no special instrument to detect it， the oil can be dropped onto the hot iron plate， and it can be filled only when there is no steam coming out and burning immediately. Therefore， when repairing the hydraulic system of aluminum alloy， be careful of water ingress!
Three-mast aluminum alloy elevator: the main structure is made of high-quality high-strength aluminum extruded profiles with super load capacity and working stability. The overall lifting guardrail device has good strength， greatly reduces the height of the whole machine during transportation， and is convenient for loading and unloading. The machine has strong bearing capacity and is suitable for - people to climb at the same time.
xWafangdianAfter the elevator works for hours， the mechanical and electrical systems shall be overhauled.
wYAll boxes and distribution boxes shall be kept clean and dust on electrical equipment shall be cleaned in time.
The hydraulic lifting platform can be divided into: four-wheel mobile type， two-wheel traction type， vehicle type， auxiliary self-propelled type， and the lifting height varies from meters to meters. The load of this series of products is divided into . to . tons， which can also be customized according to user requirements， with a high load of up to tons.